Use Jameson Live Tracer™ Traceable Rodder with transmitter and receiver to locate live plastic gas service lines from meter to main. Connect transmitter to Live Tracer™ to energize unit with specific frequency. When energized rod is pushed into pipe, signal radiates out to surface where a receiver detects the frequency. The entire buried pipe can be traced and marked continuously from above ground by one man without digging.

Includes Stuffing Box that attaches to any riser.

 

• No blow-by while feeding rod into live line up to 125 PSI
• Small bullet tip guides rod from riser to service transition
• Use with transmitter & receiver to trace gas line from above ground
• 100 feet of 3/16-inch diameter traceable fiberglass rod
• Stuffing Box and Accessory Kit included
• Dimensions: 22″ X 17″ X 7″
•  Less disruption to roads and landscapes
• Minimal pavement breakage, excavation and restoration

	1/8” Live Tracer Includes Accessory Kit & Stuffing Box	3/16” Live Tracer Includes Accessory Kit & Stuffing Box
Applications	For Service Lines 1/2” To 1” And Tight Bends	For Service Lines 3/4” to 1-1/2”
Features	Stuffing box attaches to any service riser. Rated for 125psi with no blow by. End fitting options available to navigate transition fittings and stab couplings.	Stuffing box attaches to any service riser. Rated for 125psi with no blow by. End fitting options available to navigate transition fittings and stab couplings.
Lengths Available	100’ - 300’	100’ - 300’
Recommended Conduit	1/2” - 1”	3/4” - 1-1/2”
Min. Bend Radius	1.75”	2.5”
Pull Strength	150 lbs.	300 lbs.
Stuffing Box w/ Accessory Kit	Included 15-18-SB-KIT	Included 15-316-SB-KIT
Dimensions	22” x 17” x 7”	22” x 17” x 7”
Weight	11.1 - 15.0 lbs.	11.6 - 15.5 lbs.
	Trace live gas & water service lines from the meter to the main	Trace live gas & water service lines from the meter to the main